How to Build a Commercial Electrical Emergency Response Plan

Last Updated: November 2, 2026

Quick Summary

A commercial electrical emergency response plan is a written set of steps for spotting, stopping and reporting electrical incidents, naming who acts, what they do, and who gets called. It matters because electrical hazards behave differently from ordinary fires, so a general evacuation plan usually does not cover them.

  • A general evacuation plan usually does not cover energized equipment, isolation steps or who may touch a panel.
  • Power can stay live after a fire alarm, and arc flash can injure someone standing several feet away.
  • Assign named roles with backups, because people are often away from the building.
  • Use only a Class C-rated extinguisher, and only on a small, contained fire with a clear exit behind you.
  • Run a tabletop review every six months and a full evacuation drill at least once a year.

Table of Contents

An electrical fire or shock in a commercial building can injure people and shut down operations within minutes.

A commercial electrical emergency response plan is a written set of steps for spotting, stopping and reporting electrical incidents. For broader context on the electrical safety requirements that apply to hazardous facilities, read our standards guide for petroleum facilities.

Most commercial buildings have more people, more equipment and more shared systems than a house. A single panel can serve several tenants. Staff may not know where the main disconnect is.

A common mistake is assuming the building’s general evacuation plan covers electrical events. It usually does not. General plans rarely address energized equipment, isolation steps or who may safely touch a panel.

Here is what a useful plan usually covers:

  • Hazard inventory for switchgear, panels, generators and battery systems
  • Clear roles for who calls, who isolates power and who guides evacuation
  • Response steps for fire, shock and smoke situations
  • Coordination with building systems, tenants and outside contractors
  • Practice through drills and scheduled plan reviews

A plan that sits in a binder fails when staff need it. Keep it short, post it where people work, and test it.

Step 1: Identify Electrical Hazards and Assess Risk

Start by listing every electrical source in the building. Walk each floor, mechanical room and roof area. Note panels, transformers, backup generators, elevator controls and any equipment that stores energy.

Then rank each hazard by how likely it is to fail and how badly it could injure someone. Focus first on equipment that is old, damaged, overloaded or poorly labelled.

  • Record the location of each main disconnect
  • Flag any panel with missing covers or damaged labels
  • Note areas with heavy extension cord use or temporary wiring
  • Mark spaces that store flammable materials near electrical equipment

For a deeper look at what to inspect, see our article on a commercial property electrical maintenance checklist. A professional assessment can also find problems a walkthrough misses. You can learn what a site review covers through commercial inspections.

Step 2: Define Roles, Responsibilities and Emergency Notification

Assign named roles so no one wonders who acts first. Keep the list short. Each role needs a backup, because people are often away from the building.

Role Main Duty
Incident lead Makes the call on evacuation and escalation
Power isolation contact Shuts off power only if trained and safe to do so
Caller Contacts emergency services and the electrical contractor
Evacuation guide Leads staff to the assembly point
Headcount lead Confirms everyone is accounted for

Write down the notification order. Include emergency services, the building owner, the facilities contact and your electrical service provider. Keep phone numbers current and post them near the main panel.

Step 3: Write Immediate Response Procedures for Fire, Shock and Smoke

Write short, direct steps for each type of incident. Staff under stress need one action at a time. Separate, printable checklists for each scenario can help, because the correct first action differs between an arc flash, a smoke event, and a shock injury.

Electrical fire response checklist

  • Pull the nearest fire alarm and call 911
  • Evacuate the immediate area and close doors behind you if safe
  • Do not use water on energized equipment
  • Use only a Class C-rated extinguisher, and only on a small, contained fire with a clear exit behind you
  • Never fight a fire that is spreading, producing heavy smoke, or blocking your exit
  • Tell responding firefighters which panels or equipment are involved and whether power is still on

Confirm that the extinguishers on site are rated for electrical fires and that staff know where they are mounted.

Electric shock and electrocution response checklist

  • Do not touch the person while they are in contact with the source
  • Isolate power at the labelled disconnect, or call for trained isolation
  • Call 911 and report the shock and the person’s condition
  • Begin first aid only once the scene is confirmed safe
  • Keep others back from the equipment until it is locked out

Smoke and arcing response checklist

  • Treat smoke from electrical equipment as a potential fire, not a nuisance
  • Evacuate the area and close doors if safe
  • Call 911 and report the location and what is smoking
  • Do not reset breakers or re-energize equipment to “test” it
  • Isolate the affected circuit only if trained and the path is clear

Damaged wiring and exposed conductors

  • Keep people away and post a spotter if needed
  • Do not touch hanging or damaged conductors, even if they look dead
  • Call a qualified electrician and isolate the circuit only if trained
  • Record the location and condition for the incident report
Watch Out
Only trained staff should isolate power. Anyone without training should stay clear and call for help. If you are not sure whether isolation is safe, leave it to your electrical contractor.

Shutting Off Power and Isolating Equipment Safely

Only trained staff should isolate power. Anyone without training should stay clear and call for help. Trained staff should:

  1. Confirm the path to the main disconnect is clear
  2. Use the labelled disconnect for the affected circuit
  3. Test that the equipment is dead before any work continues
  4. Apply a lockout tag so no one restores power by accident

Lockout and tagout is a formal safety procedure. Follow the workplace safety rules that apply in your province. Restoration of power after an incident should be authorized only by a qualified electrician or the utility, never by whoever happens to be nearby.

Book online →

Coordination with building systems and occupants

During any of these events, the incident lead should also direct the facilities team to hold elevators at the ground floor, confirm whether fire alarms and sprinklers are active, and check whether backup power has engaged. Tenants on the affected circuit should stop using equipment and wait for an all-clear. Security should control access so responders and the electrical contractor can reach the panel without obstruction.

Step 4: Plan Evacuation, Headcounts and Coordination with Building Systems

Set a primary and backup assembly point away from the building and clear of vehicle routes. Staff should know both locations before an incident happens.

Facilities manager conducting a headcount at an assembly point as part of an electrical emergency response plan.
Facilities manager conducting a headcount at an assembly point as part of an electrical emergency response plan.

Use a headcount list that matches your sign-in records. Tenants and contractors need to be counted too, not just employees. A missing person should be reported to responders straight away, with their last known location.

Coordinate with building systems. Tell the building owner or facilities team which elevators, ventilation and access controls to shut down. Ask tenants to stop using equipment on the affected circuit.

Step 5: Prepare for Power Outages with a Preparedness Checklist

Outages are a common cause of trouble in commercial buildings. Freezers spoil stock, alarms can fail and elevators can trap people. Plan for them before they happen.

  • Confirm emergency lighting works and is tested monthly
  • Check that backup generators run and have fuel
  • List equipment that must be shut down before restoring power
  • Keep flashlights and a battery radio at the main exit
  • Record which systems restart automatically and which need a person

For a step-by-step guide to what to do during a real outage, read our article on steps to take during an electrical power outage.

Step 6: Build a Template and Review Examples of Working Plans

Build your plan from a simple template. Include a cover page with the date and plan owner, a hazard list, a roles table, response steps, a contact sheet, a drill log, and a recovery checklist.

A working plan is specific. It names the disconnect location, the assembly point and the person responsible. A weak plan says “contact an electrician.” A strong plan lists the contractor’s number and the process for calling them.

Plan testing and measurable readiness

A plan that is never tested is a guess. Set a drill cadence and measure the result so readiness is auditable.

  • Run a tabletop review every six months and a full evacuation drill at least once a year
  • Record response times: time to alarm, time to evacuation, time to headcount completion
  • Score each drill against simple criteria: was the disconnect located, was the caller reached, was the headcount accurate
  • Log every corrective action with an owner and a due date, and review open items at the next drill
  • Review the plan after any new tenant, new equipment, or significant building change
Pro Tip
Keep a one-page drill log at the main panel. A short, dated record of what was tested and what failed is the fastest way to show a plan is being maintained.

Post-incident recovery and safe re-energization

After an electrical incident, the building should not simply return to service. Recovery should follow a defined sequence:

  1. Keep the affected circuits locked out until a qualified electrician inspects the equipment
  2. Document damage to panels, wiring, and connected equipment with photos and notes
  3. Confirm the cause before any circuit is restored
  4. Record corrective actions and assign owners
  5. Authorize re-energization only by a qualified electrician or the utility
  6. Brief staff and tenants on what changed before normal operations resume

Recovery is a step many plans leave out. Defining who authorizes power restoration and how damage is documented helps the plan cover the full sequence from first alarm to safe return to service.

Booking a Site Electrical Review with Bighorn Electric

A written plan is only as good as the building it describes. Bighorn Electric can review your site’s electrical systems and help you match the plan to what is actually installed. Our licensed, insured and bonded electricians serve commercial sites in the East Kootenays. You can review the commercial services Bighorn Electric offers for commercial sites before booking.

For current services and availability for commercial properties, visit the Bighorn Electric website. Book online to arrange a review of your building.

Frequently Asked Questions

What should a commercial electrical emergency response plan include?

A complete plan identifies electrical hazards and the equipment they affect, names who acts in each role, lists emergency contacts and notification steps, and sets out immediate actions for fire, smoke and shock. It also defines how power is isolated, where staff assemble, how headcounts are taken, and how incidents are documented. Reviewing the plan after each drill or incident keeps it current with changes to the building, its equipment and its occupants.

How often should a commercial electrical emergency plan be reviewed?

Review the plan at least once a year and after any significant change, such as new equipment, a renovation, a change in tenants or an electrical incident. Drills should test the notification chain and isolation steps, and the results should be recorded and used to update the plan. Confirm that emergency contact details and the location of shutoff points are still accurate at each review.

Who should be responsible for responding to an electrical emergency?

Assign one person to lead the response, a backup for that role, and named individuals to handle evacuation, emergency calls and coordination with building occupants. Only trained and qualified people should operate or isolate energized equipment. Everyone else should evacuate and report the situation to the designated lead. Write these assignments into the plan so staff know their role without having to ask.

When should a licensed electrician be called after an electrical incident?

Call a licensed electrician after any electrical fire, shock, arc flash, visible damage to wiring, or unexplained tripping of breakers, even if the problem appears to have stopped. Do not re-energize the affected circuit until a qualified person has inspected it and confirmed it is safe. Bighorn Electric can be reached through its website for current availability and a quote.

Recent Posts

0 Comments